Product Description
Product Parameters
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Detailed Photos
NMRV-063-30-VS–AS-80B5-0.75KW-B3 |
|||
NMRV |
Means hole-input with flange |
||
NRV |
Means shaft-input without flange |
||
063 |
Centre-to-centre spacing of worm-gear speed reducer |
||
30 |
ratio |
||
VS |
Double input shaft |
F1(FA) |
Flange putput shaft |
AS |
Single output shaft |
AB |
Double output shaft |
PAM |
|
80B5 |
Motor mounting facility |
0.75KW |
|
B3 |
Mounting position |
N2 |
NRV571 |
NRV030 |
NRV040 |
NRV050 |
NRV063 |
NRV075 |
NRV090 |
NRV110 |
NRV130 |
400 |
390 |
530 |
1571 |
1400 |
1830 |
2160 |
2390 |
3571 |
3950 |
250 |
460 |
620 |
1200 |
1650 |
2150 |
2520 |
2800 |
3530 |
4610 |
150 |
550 |
740 |
1420 |
1960 |
2450 |
2990 |
3310 |
4180 |
5470 |
100 |
630 |
850 |
1620 |
2250 |
2910 |
3430 |
3800 |
4790 |
6260 |
60 |
740 |
1000 |
1920 |
2660 |
3450 |
4060 |
4500 |
5680 |
7420 |
40 |
850 |
1150 |
2200 |
3050 |
3950 |
4650 |
5150 |
6500 |
8500 |
25 |
990 |
1350 |
2570 |
3570 |
4620 |
5440 |
6571 |
7600 |
9940 |
10 |
1350 |
1830 |
3490 |
4840 |
6270 |
7380 |
8180 |
10320 |
13500 |
|
|
|
|
|
|
|
|
|
|
A |
50 |
65 |
84 |
101 |
120 |
131 |
162 |
191 |
203 |
B |
38 |
50 |
64 |
76 |
95 |
101 |
122 |
151 |
163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
Hardness: | Hardened Tooth Surface |
---|---|
Installation: | 90 Degree |
Layout: | Expansion |
Gear Shape: | Bevel Gear |
Step: | Single-Step |
Type: | Gear Reducer |
Samples: |
US$ 30/Piece
1 Piece(Min.Order) | |
---|
Safety Precautions When Working with NMRV Gearboxes
Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:
- Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
- Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
- Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
- Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
- Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
- Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
- Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
- Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
- Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
- Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
- Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
- Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.
By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.
Design Principles of an NMRV Gearbox
The design of an NMRV (worm gear) gearbox is based on key principles that enable its efficient and reliable operation:
- Worm Gear Mechanism: The core of an NMRV gearbox is the worm screw and worm wheel. The worm screw, typically cylindrical in shape, meshes with the teeth of the worm wheel. This configuration provides high gear reduction ratios.
- Helical Gearing: The worm screw is usually helical, allowing for smoother engagement with the worm wheel. Helical gearing reduces the sliding friction and noise associated with traditional straight-cut worm gears.
- Compact Design: NMRV gearboxes are designed to be compact, often with a right-angle configuration. This allows for efficient use of space in various applications.
- Alloy Construction: Many NMRV gearboxes are constructed from high-quality alloys, providing durability and corrosion resistance. The choice of materials ensures a gearbox capable of withstanding varying loads and environmental conditions.
- Bearing Support: Bearings support the rotating elements within the gearbox, reducing friction and ensuring smooth operation. Bearings are strategically placed to handle radial and axial loads.
- Sealing and Lubrication: NMRV gearboxes are equipped with effective sealing mechanisms to prevent the entry of contaminants and to retain lubricating oil. Proper lubrication is essential for reducing wear and enhancing gearbox efficiency.
- Efficient Power Transmission: The worm gear mechanism in NMRV gearboxes provides high gear reduction ratios, allowing for efficient power transmission while minimizing energy losses.
- Quiet Operation: The helical design of the worm screw and worm wheel contributes to quieter operation compared to traditional straight-cut worm gears.
- Wide Range of Ratios: NMRV gearboxes are available in various gear ratios, allowing users to select the appropriate configuration for their specific application needs.
The combination of these design principles results in an NMRV gearbox that offers efficient, reliable, and quiet power transmission for a wide range of industrial applications.
Working Principle of an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, operates based on a worm and worm wheel mechanism. Here’s how it works:
The gearbox consists of two main components: the worm (a screw-like shaft) and the worm wheel (a toothed wheel). The worm is driven by the input power source, while the worm wheel is connected to the output shaft.
As the worm rotates, its threaded shaft engages with the teeth of the worm wheel. The helical shape of the worm causes the teeth of the worm wheel to push against each other, resulting in a smooth and gradual transfer of motion. This mechanism provides the speed reduction and torque multiplication required for various applications.
One key characteristic of NMRV gearboxes is that the worm can turn the worm wheel, but the reverse is not possible due to the high friction generated by the helical threads. This feature prevents the output shaft from back-driving the input shaft, providing mechanical locking and enhancing safety and stability in applications.
The NMRV gearbox’s operation is continuous, and its simple design contributes to its reliability and efficiency. It is important to ensure proper lubrication to minimize wear and heat generation during operation.
editor by CX 2023-11-15