Ürün Açıklaması
High Rpm RV series Aluminum Alloy Worm Gear box NMRV 571-150 Reducer Variable Wheel Drive Speed Reduction Worm Gearbox
Ürün Parametreleri
Specification
| Tip | Worm Gearbox/Worm Gear Speed Reducer |
| Model | NMRV:571,030,040,050,063,075,090,110,130,150 |
| Center distance | 25-150mm |
| Oran | 5,7.5,10,15,20,25,30,40,50,60,80,100 |
| Torque | 1.8-1800Nm |
| Motor | 2 pole, 4 pole, 6 pole |
| Mounting position | Omnidirectional |
| Renk | Blue/Silver grey Or On request |
| Malzeme | NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron |
Detaylar
Multiple inputs and outputs
Özellik
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.
contact-info.html
| Model | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 |
| Oran | 5,7.5,10,15,20,25,30,40,50,60,80,100 |
| Çıkış Torku | 1.8-1760Nm |
| Application | Machinery Industry |
| Input Speed | 900-2800RPM |
| Output Speed | 10-250RPM |
| Malzeme | Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-Iron |
| Worm Wheel: ZCuSn10Pb1 | |
| Worm:20Cr | |
| Pinion:Tin Bronze | |
| Output Shaft: Steel-45# | |
| IEC Flange | IEC Standard Flange Or On Customer Request |
Detaylı Fotoğraflar
| Sertlik: | Sertleştirilmiş Diş Yüzeyi |
|---|---|
| Kurulum: | 90 Degree |
| Düzen: | Genleşme |
| Dişli Şekli: | Bevel Gear |
| Adım: | Tek Adımlı |
| Tip: | Gear Reducer |
| Örnekler: | US$ 30/Piece 1 Adet (Minimum Sipariş) | |
|---|
Cost of an NMRV Gearbox
The cost of an NMRV gearbox can vary widely depending on factors such as type, size, quality, brand, features, customization, materials, construction, and market demand. As of my last update in September 2021, prices can range from tens of dollars for standard models to several hundred dollars or more for larger or specialized configurations. It’s important to obtain quotes from various suppliers and manufacturers for an accurate cost estimate.
NMRV Şanzımanı için Yağlama
NMRV şanzımanının düzgün çalışması ve uzun ömürlü olması için yağlama şarttır. Gerekli yağlayıcı türü ve miktarı, şanzıman modeline ve üreticisine bağlı olarak değişebilir. İşte genel yağlama uygulamaları:
- Önerilen Yağlayıcılar: Şanzıman üreticisi tarafından belirtilen yağlayıcıları kullanın. Genellikle, uygun viskoziteye ve katkı maddelerine sahip yüksek kaliteli şanzıman yağları önerilir.
- İlk Dolum: Şanzımanın ilk çalıştırılmasından önce, önerilen yağlayıcı ile doğru seviyeye kadar uygun şekilde doldurulduğundan emin olun. Doğru miktar için üreticinin yönergelerini izleyin.
- Yağ Değişimi: Üreticinin önerdiği aralıklarla düzenli olarak yağlayıcıyı değiştirin. Zamanla, ısı ve kirlenme nedeniyle yağlayıcılar bozulabilir ve bu da şanzıman performansını etkileyebilir.
- Sıcaklık Hususları: Aşırı sıcaklıklarda çalışan şanzımanlar, uygun viskozite ve koruma sağlamak için belirli sıcaklık aralıklarına sahip yağlayıcılara ihtiyaç duyabilir.
- Seviyeleri Kontrol Etme: Vites kutusundaki yağlama seviyesini periyodik olarak kontrol ederek belirtilen aralıkta olduğundan emin olun. Bu, yetersiz yağlamadan kaynaklanabilecek hasarları önleyebilir.
- Petrol Analizi: Bazı şanzıman sistemlerinde, yağlama maddesinin durumunu izlemek ve önemli hasara yol açmadan önce potansiyel sorunları tespit etmek için düzenli yağ analizi yapılması faydalıdır.
Doğru yağlama uygulamaları, NMRV şanzımanında sürtünmeyi, aşınmayı ve ısı oluşumunu azaltarak verimliliği artırır ve kullanım ömrünü uzatır.
Choosing the Right Size NMRV Gearbox for Your Application
Selecting the appropriate size NMRV gearbox for your application involves considering several important factors:
- Input Power: Determine the power requirement of your application, including both the input speed and the required output torque.
- Service Factor: Take into account any potential overloads or unexpected conditions that may occur during operation. Applying a service factor ensures the gearbox can handle occasional peak loads.
- Output Speed: Calculate the desired output speed of the gearbox. This is crucial for ensuring the gearbox meets the requirements of your application.
- Operating Conditions: Consider the environmental conditions in which the gearbox will operate, including temperature, humidity, and exposure to dust or chemicals.
- Mounting and Space: Evaluate the available space for mounting the gearbox and ensure it fits within the allotted dimensions.
- Shaft Configuration: Determine whether the gearbox requires a specific shaft configuration or if additional components such as couplings are needed.
- Application Type: Consider the type of application the gearbox will be used in, such as conveyor systems, agitators, mixers, or other specific applications.
- Load Characteristics: Analyze the load characteristics, including the type of load (constant, intermittent, shock), to ensure the gearbox can handle the load variations.
It’s essential to work closely with gearbox manufacturers or distributors who can provide technical support and assist in selecting the right size NMRV gearbox based on your specific application requirements.
editor by CX 2023-10-30