China Precise Grinding RV Worm Gearbox 030-150 From Gele Transmission worm gearbox calculation

Item Description

Major Supplies:
one)housing:aluminium alloy ADC12(dimension 571-090) die forged iron HT200(measurement 110-150)
two)Worm:20Cr, ZI Involute profile carbonize&quencher warmth therapy make equipment surface hardness up to fifty six-62 HRC Following precision grinding, carburization layer’s thickness in between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Thorough Photographs

Blend Choices:
Input:with enter shaft, With sq. flange,With IEC common input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are offered with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS

Exploded Look at:

Product Parameters

Previous Model	New Model	Ratio	Center Distance	Electricity	Input Dia.	Output Dia.	Output Torque	Fat
RV571		7.5~100	25mm	.06KW~.12KW	Φ9	Φ11	21N.m	.7kgs
RV030	RW030	seven.5~one hundred	30mm	.06KW~.25KW	Φ9(Φ11)	Φ14	45N.m	one.2kgs
RV040	RW040	7.5~a hundred	40mm	.09KW~.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~a hundred	50mm	.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	seven.5~100	63mm	.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	six.2kgs
RV075	RW075	seven.5~one hundred	75mm	.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	seven.5~a hundred	90mm	.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	seven.5~a hundred	110mm	.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	seven.5~100	130mm	.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	forty eight.0kgs
RV150	RW150	7.5~a hundred	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		eighty four.0kgs

GMRV Define Dimension:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	ninety seven	54	forty four	14	fifty five	32	fifty six	63	65	29	fifty five	forty	57	30	seventy five	forty four	six.5	21	five.five	M6*10(n=4)	0°	5	sixteen.three	27
040	one hundred	121.5	70	60	18(19)	60	43	71	78	75	36.five	70	50	71.5	forty	87	fifty five	six.5	26	6.five	M6*10(n=4)	45°	six	twenty.8(21.8)	35
050	a hundred and twenty	a hundred and forty four	80	70	twenty five(24)	70	49	eighty five	ninety two	85	43.five	eighty	sixty	84	fifty	a hundred	64	eight.5	30	seven	M8*12(n=4)	45°	eight	28.3(27.3)	40
063	a hundred and forty four	174	a hundred	85	25(28)	eighty	sixty seven	103	112	ninety five	fifty three	95	seventy two	102	sixty three	110	80	8.five	36	8	M8*twelve(n=8)	45°	eight	28.3(31.3)	fifty
075	172	205	a hundred and twenty	ninety	28(35)	ninety five	seventy two	112	a hundred and twenty	a hundred and fifteen	57	112.five	86	119	seventy five	a hundred and forty	ninety three	11	40	10	M8*fourteen(n=8)	45°	eight(ten)	31.3(38.3)	60
090	206	238	one hundred forty	one hundred	35(38)	one hundred ten	seventy four	a hundred thirty	a hundred and forty	a hundred thirty	sixty seven	129.five	103	135	90	a hundred and sixty	102	13	45	11	M10*16(n=8)	45°	10	38.3(forty one.3)	70
110	255	295	a hundred and seventy	one hundred fifteen	42	130	–	one hundred forty four	a hundred and fifty five	a hundred sixty five	74	a hundred and sixty	127.five	167.5	one hundred ten	200	one hundred twenty five	fourteen	fifty	14	M10*eighteen(n=8)	45°	twelve	forty five.three	85
a hundred thirty	293	335	200	a hundred and twenty	45	a hundred and eighty	–	155	170	215	eighty one	179	146.five	187.5	one hundred thirty	250	a hundred and forty	sixteen	sixty	fifteen	M12*20(n=8)	45°	14	48.8	100
a hundred and fifty	340	400	240	145	fifty	180	–	185	200	215	96	210	a hundred and seventy	230	one hundred fifty	250	one hundred eighty	eighteen	72.five	18	M12*22(n=8)	45°	fourteen	53.8	120

Business Profile

About CZPT Transmission:
We are a professional reducer maker found in HangZhou, ZHangZhoug province.
Our top goods is full range of RV571-a hundred and fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Pc models, UDL Variators and AC Motors, G3 helical gear motor.
Goods are commonly utilized for programs these kinds of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-creating, development equipment, metallurgic mine, environmental defense engineering, and all sorts of computerized traces, and assembly strains.
With quick supply, superior right after-sales provider, superior creating facility, our items sell well both at home and overseas. We have exported our reducers to Southeast Asia, Jap Europe and Middle East and so on.Our purpose is to produce and innovate on basis of high quality, and produce a good reputation for reducers.

Packing information:Plastic Bags+Cartons+Wooden Situations , or on ask for
We participate Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Acquire Eurasia

Logistics

Following Sales Provider

one.Routine maintenance Time and Guarantee:Inside of 1 12 months soon after acquiring goods.
2.Other Service: Such as modeling assortment manual, installation guidebook, and problem resolution manual, etc.

FAQ

one.Q:Can you make as per consumer drawing?
A: Yes, we offer you personalized provider for consumers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your terms of payment ?
   A: thirty% deposit just before production,equilibrium T/T just before shipping and delivery.
three.Q:Are you a trading business or maker?
   A:We are a manufacurer with advanced products and knowledgeable workers.
4.Q:What is actually your manufacturing capacity?
   A:8000-9000 PCS/Thirty day period
five.Q:Free sample is offered or not?
   A:Yes, we can supply free of charge sample if client concur to pay out for the courier cost
six.Q:Do you have any certificate?
   A:Indeed, we have CE certificate and SGS certificate report.

Get in touch with details:
Ms Lingel Pan
For any queries just really feel totally free ton speak to me. Numerous thanks for your sort interest to our company!

US $10-200
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

US $10-200
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<br

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.

응용 프로그램

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

editor by czh 2023-01-25