China high quality 90 Degree Shaft Nmrv090 Aluminum Worm Gear Box gearbox design

Deskripsi Produk

 

Deskripsi Produk

 

Foto Detail

 

The NMRV reducer is relatively light in weight, and the shell is made of aluminum alloy. It has the advantages of light weight, superior strength, beautiful appearance, high heat dissipation performance, long service life, no noise in action, etc. It is convenient and simple to connect with the motor. Easy to install. NMRV reducer is a more practical transmission equipment, and its appearance design and body are more in line with the needs of the public than other types of reducers. Although the RV reducer made of aluminum alloy only emerged in 2007, its application field and popularity are even better than other types of reducers. It is a reducer with high practicability. , but also the integration of advanced technology at home and abroad. The NMRV reducer is extremely convenient to connect with ordinary motors, continuously variable transmissions, and flanged electromagnetic clutch brakes, and does not require couplings to connect. It is suitable for all-round installation, and the output torque is relatively large, and the work is quite stable.

Editing and broadcasting of main materials

1. Body, die-casting aluminum alloy;

2. Worm shaft, 20 Crq steel, high temperature treatment;

3. Worm gear, nickel bronze alloy;

4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;

5. Cast iron body, painted with bIu RA5571.

Regular center distance specification editing and broadcasting

Center distance: 130 (unit: mm).

Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)

Advantage: ♠ Occupied no space: The space requirement for the installation of output shaft is considerably large while assembling motor or reduce. The installation of hollow type reducer may form right Angle with motor,thus facilitate miniaturize of the machine

♠ Self-locking: For the place require for minor holding force,save the costof baking device,such as in slope conveyor ♠ Fast stop: The ordinary gear reducer available in market requires 5-10seconds stop time. but NRV series product need only 2-5 seconds to reach state of still. ♠ High accommodation:You may select from hollow shaft. uni-direction output shaft or dal output shaft, easy to modify, only 1 minute to complete the dissemble and assemble of shaft. ♠ High safety: Use transmission different from conventional method, no sprocket pulley is needed,no exposed
transmission structure, Reduce the possibility of operator ♠ Good protection: Water, dust proof,the protection class Ip55 possesses,good isolation to dust and moisture

♠ Allow multiple sides installation,no restriction in angle: There are holes for mounting on all plains of the series of
product for your selection of direction and angle required.

♠ Good cooling effect: One formation aluminum alloy for casing, quigley heat dissipation extended life for worn lever, worn gear, good durability(wormca-sing during running is normal)

♠ Easy maintenance: Different from conventional mounting method,you den’t need the dissemble the sprocket, pulley but only dissemble and Assemble the mounting base of the reducer to compete the modification easily.

♠ No restriction on motor brand: Match with 15W-200W motor or domestic product available in market without further processing.

♠ Wide reduction ratio: Easily change the reduction ration from 30-20000 due to detached assemble.

♠ May complete with brake,clutch in 1 formation aesthetic and practice.

Main fetures:

1. Large speed ratio range 2. Small volume,low weight ,saving space for mounting. 3. Self-locking

4. High cost performance

5. Suitable for various motors

Use and safety guarantee

1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when moving

Pengemasan & Pengiriman

 

Profil Perusahaan

 

Kekerasan:	Permukaan Gigi yang Mengeras
Instalasi:	90 Degree
Tata letak:	Ekspansi
Gear Shape:	Cylindrical Gear
Melangkah:	Langkah Tunggal
Type:	Gear Reducer

Contoh:	US$ 100/Piece 1 Buah (Minimum Pemesanan) | Minta Sampel

Troubleshooting Abnormal Noises in an NMRV Gearbox

Abnormal noises from an NMRV gearbox can be troublesome and might indicate underlying issues. Follow these steps to troubleshoot and resolve the problem:

1. Identify the Noise: Listen closely to the noise and determine if it’s a grinding, whining, or knocking sound.
2. Check Lubrication: Insufficient or contaminated lubrication can lead to noises. Ensure the gearbox is properly lubricated.
3. Inspect Gears: Examine the gear teeth for wear, damage, or misalignment.
4. Look for Foreign Objects: Foreign objects inside the gearbox can cause noise. Clean and inspect the interior.
5. Check Bearings: Worn or damaged bearings can be noisy. Inspect and replace them if necessary.
6. Inspect Seals: Damaged seals can allow contaminants in, affecting performance. Replace damaged seals.
7. Examine Housing: Ensure the gearbox housing is intact without cracks or misalignment.
8. Review Load Conditions: Excessive loads can lead to noise. Ensure the gearbox isn’t overloaded.
9. Check Mounting: Confirm the gearbox is properly mounted and aligned.
10. Consult Guidelines: Refer to manufacturer guidelines for specific troubleshooting steps.
11. Professional Help: If the issue persists, seek help from a professional technician or manufacturer.

Follow these steps to identify and rectify abnormal noises in your NMRV gearbox.

Maintenance and Service of an NMRV Gearbox

Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:

• Pelumasan: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
• Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
• Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
• Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
• Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
• Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
• Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
• Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
• Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.

By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.

Memasang Gearbox NMRV

Pemasangan gearbox NMRV memerlukan perhatian cermat untuk memastikan penyelarasan yang tepat dan pemasangan yang aman. Berikut panduan umum untuk proses pemasangannya:

1. Siapkan Ruang Kerja: Pastikan Anda memiliki ruang kerja yang bersih dan rapi dengan peralatan dan perlengkapan yang diperlukan.
2. Penempatan: Tempatkan gearbox NMRV pada posisi yang diinginkan di mesin Anda, pastikan posisinya sejajar dengan komponen input dan output.
3. Penyelarasan: Pastikan poros input gearbox sejajar dengan poros penggerak dari sumber daya. Ketidaksejajaran dapat menyebabkan keausan dini dan penurunan efisiensi.
4. Pemasangan: Pasang gearbox NMRV dengan aman ke rangka mesin menggunakan pengencang yang sesuai. Ikuti rekomendasi pabrikan untuk spesifikasi torsi.
5. Kopling Masukan: Hubungkan poros input gearbox ke poros penggerak menggunakan kopling yang sesuai. Kopling ini harus disejajarkan dengan benar untuk menghindari tekanan yang tidak perlu pada komponen gearbox.
6. Kopling Keluaran: Demikian pula, hubungkan poros keluaran gearbox ke komponen yang digerakkan menggunakan kopling yang sesuai.
7. Pelumasan: Sebelum pengoperasian, pastikan untuk mengisi gearbox dengan pelumas yang direkomendasikan untuk memastikan persambungan gigi yang tepat dan mengurangi gesekan.
8. Pengujian: Nyalakan mesin sebentar untuk memeriksa apakah ada suara, getaran, atau kebocoran yang tidak biasa. Lakukan penyesuaian yang diperlukan.

Sangat penting untuk mengikuti panduan dan spesifikasi pemasangan dari pabrikan untuk memastikan proses pemasangan berjalan lancar dan tanpa masalah. Pemasangan yang tepat berkontribusi pada umur pakai dan kinerja yang andal dari gearbox NMRV Anda.

editor by CX 2023-09-05