Deskripsi Produk
The Best Quality Gearmotor Nmrv Series Gearbox From Aokman
Komponen:
1. Housing: Die-cast Aluminium Alloy Gearbox (RV571~RV090)
Cast Iron Gearbox (RV110~RV150)
2. Worm Wheel Wearable Tin Bronze Alloy, Aluminum Bronze Alloy
3. Worm Shaft: 20Cr Steel, carburizing, quenching, grinding, surface hardness 56-62HRC, 0.3-0.5mm remaining carburized layer after precise grinding
4. Input Configurations:
Equipped with Electric Motors (AC Motor, Brake Motor, DC Motor, Servo Motor)
IEC-normalized Motor Flange
Solid Shaft Input
Worm Shaft Tail Extension Input
5. Konfigurasi Output:
Keyed Hollow Shaft Output
Hollow Shaft with Output Flange
Plug-in CHINAMFG Shaft Output
6. Spare Parts: Worm Shaft Tail Extension, Single Output Shaft, Double Output Shaft, Output Flange, Torque Arm, Dust Cover
7. Gearbox Painting:
Aluminium Alloy Gearbox:
After Shot Blasting, Anticorrosion Treatment and Phosphating, Paint with the Color of RAL 5571 Gentian Blue or RAL 7035 Light Grey
Cast Iron Gearbox:
After Painting with Red Antirust Paint, Paint with the Color of RAL 5571 Gentian Blue
Model:
Hollow Shaft Input with IEC-normalized Motor Flange
RV571~RV150
Solid Shaft Input
RV571~RV150
Fitur:
1. Quality aluminum alloy gear box, light weight and not rust
2. 2 optional worm wheel materials: Tin bronze or aluminum bronze alloy
3. Standard parts and very flexible for shaft configurations and motor flange interface
4. Several optional mounting options
5. Low noise, High efficiency in heat dissipation
Parameters:
| Models | Rated Power | Rated Ratio | Input Hole Dia. | Input Shaft Dia. | Output Hole Dia. | Output Shaft Dia. | Jarak Pusat |
| RV571 | 0,06KW~0,12KW | 5~60 | Φ9 | Φ9 | Φ11 | Φ11 | 25 mm |
| RV030 | 0,06KW~0,25KW | 5~80 | Φ9(Φ11) | Φ9 | Φ14 | Φ14 | 30 mm |
| RV040 | 0,09KW~0,55KW | 5~100 | Φ9(Φ11,Φ14) | Φ11 | Φ18(Φ19) | Φ18 | 40 mm |
| RV050 | 0,12KW~1,5KW | 5~100 | Φ11(Φ14,Φ19) | Φ14 | Φ25(Φ24) | Φ25 | 50 mm |
| RV063 | 0,18KW~2,2KW | 7.5~100 | Φ14(Φ19,Φ24) | Φ19 | Φ25(Φ28) | Φ25 | 63 mm |
| RV075 | 0,25KW~4,0KW | 7.5~100 | Φ14(Φ19,Φ24,Φ28) | Φ24 | Φ28(Φ35) | Φ28 | 75 mm |
| RV090 | 0,37KW~4,0KW | 7.5~100 | Φ19(Φ24,Φ28) | Φ24 | Φ35(Φ38) | Φ35 | 90 mm |
| RV110 | 0,55KW~7,5KW | 7.5~100 | Φ19(Φ24,Φ28,Φ38) | Φ28 | Φ42 | Φ42 | 110 mm |
| RV130 | 0,75KW~7,5KW | 7.5~100 | Φ24(Φ28,Φ38) | Φ30 | Φ45 | Φ45 | 130 mm |
| RV150 | 2,2KW~15KW | 7.5~100 | Φ28(Φ38,Φ42) | Φ35 | Φ50 | Φ50 | 150 mm |
Ratio: 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100
Instalasi:
Flange Mounted
Foot Mounted
Torque Arm Mounted
Pelumasan:
Grease Lubrication
Oil-bath and Splash Lubrication
Cooling:
Natural Cooling
Product pictures:
Packing & Delivery:
Our company :
Customer visiting:
FAQ:
1. T: Jenis gearbox apa saja yang dapat Anda produksi untuk kami?
A:Produk utama perusahaan kami: Pengatur kecepatan seri UDL, reduktor roda gigi cacing seri RV, gearbox terpasang poros seri ATA, reduktor roda gigi seri X dan B.,
Gearbox planet seri P dan reduktor gigi heliks seri R, S, K, dan F, dan banyak lagi.
lebih dari 100 model dan ribuan spesifikasi
2. T: Bisakah Anda membuat sesuai dengan gambar pesanan?
A: Ya, kami menawarkan layanan yang disesuaikan untuk pelanggan.
3. T: Apa syarat pembayaran Anda?
A: 30% Pembayaran di muka melalui T/T setelah penandatanganan kontrak. 70% sebelum pengiriman
4. T: Berapa MOQ Anda?
A: 1 Set
Jika Anda membutuhkan produk kami, jangan ragu untuk menghubungi saya. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aplikasi: | Machinery, Industry |
|---|---|
| Fungsi: | Perubahan Kecepatan, Pengurangan Kecepatan |
| Tata letak: | Right Angle Worm Gearbox |
| Kekerasan: | Tin Bronze or Aluminum Bronze |
| Instalasi: | Flange, Foot, Torque Arm Mounted |
| Melangkah: | Langkah Tunggal |
| Kustomisasi: | Tersedia | Permintaan Khusus |
|---|
Troubleshooting Abnormal Noises in an NMRV Gearbox
Abnormal noises from an NMRV gearbox can be troublesome and might indicate underlying issues. Follow these steps to troubleshoot and resolve the problem:
- Identify the Noise: Listen closely to the noise and determine if it’s a grinding, whining, or knocking sound.
- Check Lubrication: Insufficient or contaminated lubrication can lead to noises. Ensure the gearbox is properly lubricated.
- Inspect Gears: Examine the gear teeth for wear, damage, or misalignment.
- Look for Foreign Objects: Foreign objects inside the gearbox can cause noise. Clean and inspect the interior.
- Check Bearings: Worn or damaged bearings can be noisy. Inspect and replace them if necessary.
- Inspect Seals: Damaged seals can allow contaminants in, affecting performance. Replace damaged seals.
- Examine Housing: Ensure the gearbox housing is intact without cracks or misalignment.
- Review Load Conditions: Excessive loads can lead to noise. Ensure the gearbox isn’t overloaded.
- Check Mounting: Confirm the gearbox is properly mounted and aligned.
- Consult Guidelines: Refer to manufacturer guidelines for specific troubleshooting steps.
- Professional Help: If the issue persists, seek help from a professional technician or manufacturer.
Follow these steps to identify and rectify abnormal noises in your NMRV gearbox.
Maintenance and Service of an NMRV Gearbox
Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:
- Pelumasan: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
- Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
- Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
- Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
- Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
- Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
- Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
- Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
- Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.
By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.
Working Principle of an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, operates based on a worm and worm wheel mechanism. Here’s how it works:
The gearbox consists of two main components: the worm (a screw-like shaft) and the worm wheel (a toothed wheel). The worm is driven by the input power source, while the worm wheel is connected to the output shaft.
As the worm rotates, its threaded shaft engages with the teeth of the worm wheel. The helical shape of the worm causes the teeth of the worm wheel to push against each other, resulting in a smooth and gradual transfer of motion. This mechanism provides the speed reduction and torque multiplication required for various applications.
One key characteristic of NMRV gearboxes is that the worm can turn the worm wheel, but the reverse is not possible due to the high friction generated by the helical threads. This feature prevents the output shaft from back-driving the input shaft, providing mechanical locking and enhancing safety and stability in applications.
The NMRV gearbox’s operation is continuous, and its simple design contributes to its reliability and efficiency. It is important to ensure proper lubrication to minimize wear and heat generation during operation.
editor by CX 2024-04-15