Description du produit
Description du produit
Gphq RV worm drive gear speed reducer transmission gearbox
NMRV series worm gear reducer:
Sa structure, son contour, ses dimensions d'installation ainsi que ses performances sont identiques à celles de
Europe an products,they are interchangeable,and the materials and machining process are advanced internationally.The product is featured by:
1. Faible niveau sonore et faible élévation de température.
2.High bearing capability,smooth run and long service life.
3. Structure compacte, petit volume, poids léger, belle forme et facile à installer.
4. Peut fonctionner en continu dans un environnement serveur et présente une bonne fiabilité.
GPHQ NMRV aluminum worm gearbox motor details:
| Taper | GPHQ NMRV Worm Gear Speed Reducer /gearbox motor |
| Modèle: | RMNV25/30/ 40/ 50/ 63/ 75/ 90/110/130/150 |
| Puissance d'entrée : | 0,06 kW, 0,09 kW, 0,12 kW, 0,18 kW, 0,22 kW, 0,25 kW, 0,37 kW, 0,55 kW, 0,75 kW, 1,1 kW, 1,5 kW, 2,2 kW, 4 kW, 5,5 kW, 7,5 kW, 11 kW, 15 kW |
| Bride IEC | 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14, 112B5, 112B14, 132B5, 160B5 |
| Rapport | 1: 7.5,10,15,20,25,30,40,50,60,80,100 |
| Matériel | Housing: Die-Cast Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150 |
| Engrenage à vis sans fin - laiton + fonte | |
| Acier Worm-20CrMn Ti cémenté et trempé, dureté de surface de 56-62 HRC | |
| Arbre en acier chromé 45# | |
| Couleur: | Bleu/Argent ou autres couleurs si la quantité est importante |
| Emballage: | Caisse en carton ou en contreplaqué |
| Délai garanti : | 1 an, sauf en cas de destruction d'origine humaine |
| Utilisations : | Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass. |
| arbre: | output CHINAMFG shaft or output hollow shaft |
Photos détaillées
Paramètres du produit
Certifications
Emballage et expédition
Profil de l'entreprise
FAQ
FAQ
1. Q : Quel est votre MOQ pour les moteurs de boîte de vitesses AC ?
A: 1pc is ok for each type electric gear box motor
2. Q : Quelle est la garantie de votre moteur réducteur de vitesse à induction ?
A: 1 year ,but except man-made destroyed
3. Q : Quels modes de paiement acceptez-vous ?
A: TT, Western Union. .
4. Q : Quel est votre mode de paiement ?
A: 100%payment in advanced less $5000 ,30% payment in advanced payment , 70% payment before sending over $5000.
5. Q : Qu'en est-il de l'emballage de votre moteur à réduction de vitesse ?
A: plywood case ,if size is small ,we will pack with pallet for less 1 container
6, Q: What information should be given, if I buy electric helical geared motor from you ?
A: rated power, ratio or output speed,type ,voltage , mounting way , quantity , if more is better.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Moteurs, machines, machines agricoles |
|---|---|
| Mise en page: | Angle droit |
| Dureté: | Surface dentaire durcie |
| Étape: | Étape unique |
| Motor Power: | 0.09kw-15kw |
| Voltage: | 380V ( Also Done as Your Need) |
| Personnalisation : | Disponible | Demande personnalisée |
|---|
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
Common Problems Associated with NMRV Gearboxes
NMRV (worm gear) gearboxes are reliable and durable, but like any mechanical system, they can experience certain issues over time. Here are some common problems that can be associated with NMRV gearboxes:
- Overheating: Inadequate lubrication or excessive load can lead to overheating, causing accelerated wear and potential damage to the gearbox components.
- Noise and Vibration: Unusual noises or excessive vibration during operation could indicate misalignment, worn gears, or damaged bearings.
- Leakage: Oil leaks can occur due to worn seals or damaged gaskets, leading to lubricant loss and potential contamination of the surrounding environment.
- Worn Gears: Over time, gear teeth can wear down due to friction and load. This can result in reduced efficiency, increased backlash, and compromised performance.
- Misalignment: Improper installation or mounting can lead to misalignment between the input and output shafts, causing increased friction, wear, and reduced efficiency.
- Backlash: Excessive backlash between the worm gear and the mating gear can lead to poor positioning accuracy and reduced efficiency in motion control applications.
- Poor Lubrication: Using incorrect or inadequate lubricants, or neglecting proper lubrication maintenance, can lead to increased friction, wear, and potential failure of gearbox components.
- Seal Damage: Worn or damaged seals can result in oil leaks and contamination, affecting the performance and lifespan of the gearbox.
- Shaft Wear: Over time, the input and output shafts can experience wear due to load and friction, affecting the overall operation of the gearbox.
- Corrosion: Exposure to harsh environments or corrosive substances can lead to corrosion of gearbox components, reducing their lifespan.
To prevent and address these common problems, it’s crucial to follow proper maintenance and servicing practices, use high-quality lubricants, address issues promptly, and consult professionals when needed. Regular inspections and proactive maintenance can help extend the operational lifespan and reliability of NMRV gearboxes.
Using an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, is commonly used for various applications that require speed reduction, torque multiplication, and smooth power transmission. This type of gearbox offers several benefits:
- Compact Design: NMRV gearboxes have a compact and space-saving design, making them suitable for applications with limited installation space.
- High Gear Ratio: Worm gear reducers can achieve high gear ratios in a single stage, making them ideal for applications where a significant reduction in speed is needed.
- Quiet Operation: The meshing of the worm gear and worm wheel results in low noise levels during operation.
- Simple Operation: NMRV gearboxes have a simple design with fewer components, leading to ease of operation and maintenance.
- Reliable and Durable: Worm gear reducers are known for their reliability and durability, making them suitable for continuous and heavy-duty applications.
Common applications of NMRV gearboxes include:
- Conveyor systems
- Material handling equipment
- Industrial machinery
- Automated systems
- Food processing equipment
- Packaging machinery
Due to their versatility and ability to provide precise speed reduction, NMRV gearboxes are widely used in various industries to optimize the performance of different types of machinery and equipment.
editor by CX 2024-04-03