Description du produit
Description du produit
Main Materials:
1)boîtier : alliage d'aluminium ADC12 (taille 571-090) ; fonte sous pression HT200 (taille 110-150) ;
2) Vis sans fin : 20Cr, profil en développante ZI ; le traitement thermique de carbonisation et de trempe permet d'atteindre une dureté de surface de l'engrenage de 56 à 62 HRC ; après rectification de précision, l'épaisseur de la couche de cémentation est comprise entre 0,3 et 0,5 mm.
3) Roue à vis sans fin : alliage d'étain résistant à l'usure CuSn10-1
Photos détaillées
Options de combinaison :
Entrée : avec arbre d'entrée, avec bride carrée, avec bride d'entrée conforme à la norme CEI
Sortie : avec bras de couple, bride de sortie, arbre de sortie simple, arbre de sortie double, couvercle en plastique
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
Vue éclatée :
Paramètres du produit
| Ancien modèle | Nouveau modèle | Rapport | Distance centrale | Pouvoir | Diamètre d'entrée. | Diamètre de sortie. | Couple de sortie | Poids |
| RV571 | 7.5~100 | 25 mm | 0,06 kW à 0,12 kW | Φ9 | Φ11 | 21N.m | 0,7 kg | |
| RV030 | RW030 | 7.5~100 | 30 mm | 0,06 kW à 0,25 kW | Φ9(Φ11) | Φ14 | 45 N.m | 1,2 kg |
| RV040 | RW040 | 7.5~100 | 40 mm | 0,09 kW à 0,55 kW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2,3 kg |
| RV050 | RW050 | 7.5~100 | 50 mm | 0,12 kW à 1,5 kW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160 N.m | 3,5 kg |
| RV063 | RW063 | 7.5~100 | 63 mm | 0,18 kW à 2,2 kW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230 N.m | 6,2 kg |
| RV075 | RW075 | 7.5~100 | 75 mm | 0,25 kW à 4,0 kW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410 N.m | 9,0 kg |
| RV090 | RW090 | 7.5~100 | 90 mm | 0,37 kW à 4,0 kW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725 N.m | 13,0 kg |
| RV110 | RW110 | 7.5~100 | 110 mm | 0,55 kW à 7,5 kW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050 N.m | 35,0 kg |
| RV130 | RW130 | 7.5~100 | 130 mm | 0,75 kW à 7,5 kW | Φ24(Φ28,Φ38) | Φ45 | 1550 N.m | 48,0 kg |
| RV150 | RW150 | 7.5~100 | 150 mm | 2,2 kW à 15 kW | Φ28(Φ38,Φ42) | Φ50 | 84,0 kg |
Dimensions du contour du GMRV :
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Profil de l'entreprise
About CZPT Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
Logistique
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
FAQ
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Angle droit |
| Dureté: | Surface dentaire durcie |
| Installation: | Horizontal Type |
| Step: | Double-Step |
| Samples: | US$ 12/Piece 1 Piece(Min.Order) | |
|---|
| Personnalisation : | Disponible | Demande personnalisée |
|---|
Safety Precautions When Working with NMRV Gearboxes
Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:
- Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
- Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
- Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
- Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
- Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
- Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
- Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
- Follow Manufacturer Guidelines: Adhere to the manufacturer’s instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
- Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
- Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
- Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
- Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.
By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.
Lubrification d'une boîte de vitesses NMRV
La lubrification est essentielle au bon fonctionnement et à la longévité d'une boîte de vitesses NMRV. Le type et la quantité de lubrifiant nécessaires peuvent varier selon le modèle et le fabricant. Voici les pratiques générales de lubrification :
- Lubrifiants recommandés : Utilisez les lubrifiants préconisés par le fabricant de la boîte de vitesses. En règle générale, il est recommandé d'utiliser des huiles pour engrenages de haute qualité, présentant la viscosité et les additifs appropriés.
- Remplissage initial : Avant la première utilisation de la boîte de vitesses, assurez-vous qu'elle est correctement remplie avec le lubrifiant recommandé, jusqu'au niveau indiqué. Respectez les instructions du fabricant concernant la quantité de lubrifiant.
- Changement de lubrifiant : Changez régulièrement le lubrifiant selon les intervalles recommandés par le fabricant. Avec le temps, les lubrifiants peuvent se dégrader sous l'effet de la chaleur et des contaminants, ce qui peut affecter les performances de la boîte de vitesses.
- Considérations relatives à la température : Les boîtes de vitesses fonctionnant à des températures extrêmes peuvent nécessiter des lubrifiants ayant des plages de température spécifiques afin de garantir une viscosité et une protection adéquates.
- Vérification des niveaux : Vérifiez régulièrement le niveau d'huile de la boîte de vitesses pour vous assurer qu'il se situe dans la plage spécifiée. Cela permet d'éviter les dommages causés par une lubrification insuffisante.
- Analyse du pétrole : Certains systèmes de boîtes de vitesses bénéficient d'analyses d'huile régulières afin de surveiller l'état du lubrifiant et d'identifier les problèmes potentiels avant qu'ils ne causent des dommages importants.
Des pratiques de lubrification appropriées contribuent à réduire la friction, l'usure et la génération de chaleur au sein de la boîte de vitesses NMRV, ce qui améliore l'efficacité et prolonge sa durée de vie.
Installing an NMRV Gearbox
Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here’s a general guide to the installation process:
- Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
- Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
- Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
- Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer’s recommendations for torque specifications.
- Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
- Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
- Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
- Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.
It’s crucial to follow the manufacturer’s installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.
editor by CX 2023-09-08