China Standard Nmrv Series Worm Gear Box with Power 60W-15kw Worm Gear Reduction Motor comer gearbox

Product Description

 

Product Parameters

Editing and broadcasting of main materials

1. Body, die-casting aluminum alloy;

2. Worm shaft, 20 Crq steel, high temperature treatment;

3. Worm gear, nickel bronze alloy;

4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;

5. Cast iron body, painted with bIu RA5571.

Regular center distance specification editing and broadcasting

Center distance: 130 (unit: mm).

Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)

Detailed Photos

 

NMRV-063-30-VS–AS-80B5-0.75KW-B3

NMRV

Means hole-input with flange

NRV

Means shaft-input without flange

063

Centre-to-centre spacing of worm-gear speed reducer

30

ratio

VS

Double input shaft

F1(FA)

Flange putput shaft

AS

Single output shaft

AB

Double output shaft

PAM

 

80B5

Motor mounting facility

0.75KW

 

B3

Mounting position

N2

NRV571

NRV030

NRV040

NRV050

NRV063

NRV075

NRV090

NRV110

NRV130

400

390

530

1571

1400

1830

2160

2390

3571

3950

250

460

620

1200

1650

2150

2520

2800

3530

4610

150

550

740

1420

1960

2450

2990

3310

4180

5470

100

630

850

1620

2250

2910

3430

3800

4790

6260

60

740

1000

1920

2660

3450

4060

4500

5680

7420

40

850

1150

2200

3050

3950

4650

5150

6500

8500

25

990

1350

2570

3570

4620

5440

6571

7600

9940

10

1350

1830

3490

4840

6270

7380

8180

10320

13500

 

 

 

 

 

 

 

 

 

 

A

50

65

84

101

120

131

162

191

203

B

38

50

64

76

95

101

122

151

163

Use and safety guarantee

1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

nmrv gearbox

Calculating Torque Requirements for an NMRV Gearbox

Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.

  1. Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
  2. Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
  3. Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
  4. Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.

Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency

Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.

nmrv gearbox

Lifespan of an NMRV Gearbox

The lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life.

High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life.

The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components.

It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.

nmrv gearbox

Choosing the Right Size NMRV Gearbox for Your Application

Selecting the appropriate size NMRV gearbox for your application involves considering several important factors:

  • Input Power: Determine the power requirement of your application, including both the input speed and the required output torque.
  • Service Factor: Take into account any potential overloads or unexpected conditions that may occur during operation. Applying a service factor ensures the gearbox can handle occasional peak loads.
  • Output Speed: Calculate the desired output speed of the gearbox. This is crucial for ensuring the gearbox meets the requirements of your application.
  • Operating Conditions: Consider the environmental conditions in which the gearbox will operate, including temperature, humidity, and exposure to dust or chemicals.
  • Mounting and Space: Evaluate the available space for mounting the gearbox and ensure it fits within the allotted dimensions.
  • Shaft Configuration: Determine whether the gearbox requires a specific shaft configuration or if additional components such as couplings are needed.
  • Application Type: Consider the type of application the gearbox will be used in, such as conveyor systems, agitators, mixers, or other specific applications.
  • Load Characteristics: Analyze the load characteristics, including the type of load (constant, intermittent, shock), to ensure the gearbox can handle the load variations.

It’s essential to work closely with gearbox manufacturers or distributors who can provide technical support and assist in selecting the right size NMRV gearbox based on your specific application requirements.

China Standard Nmrv Series Worm Gear Box with Power 60W-15kw Worm Gear Reduction Motor   comer gearbox	China Standard Nmrv Series Worm Gear Box with Power 60W-15kw Worm Gear Reduction Motor   comer gearbox
editor by CX 2024-04-26