China Custom Nmrv Gear Unit Right Angle Worm Gearbox with IEC Motor synchromesh gearbox

Product Description

 

Product Description

Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Detailed Photos

Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS

Exploded View:

Product Parameters

 
Old Model     
  New Model     Ratio     Center Distance  Power Input Dia.  Output Dia.    Output Torque Weight
RV571     7.5~100   25mm   0.06KW~0.12KW  Φ9 Φ11 21N.m  0.7kgs
RV030 RW030 7.5~100 30mm   0.06KW~0.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 7.5~100 40mm   0.09KW~0.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  2.3kgs
RV050 RW050 7.5~100 50mm   0.12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~100 63mm   0.18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  6.2kgs
RV075 RW075 7.5~100 75mm   0.25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 7.5~100 90mm   0.37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 7.5~100 110mm   0.55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 7.5~100 130mm   0.75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  48.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

GMRV Outline Dimension:

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 44 14 55 32 56 63 65 29 55 40 57 30 75 44 6.5 21 5.5 M6*10(n=4) 5 16.3 27
040 100 121.5 70 60 18(19) 60 43 71 78 75 36.5 70 50 71.5 40 87 55 6.5 26 6.5 M6*10(n=4) 45° 6 20.8(21.8) 35
050 120 144 80 70 25(24) 70 49 85 92 85 43.5 80 60 84 50 100 64 8.5 30 7 M8*12(n=4) 45° 8 28.3(27.3) 40
063 144 174 100 85 25(28) 80 67 103 112 95 53 95 72 102 63 110 80 8.5 36 8 M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 120 90 28(35) 95 72 112 120 115 57 112.5 86 119 75 140 93 11 40 10 M8*14(n=8) 45° 8(10) 31.3(38.3) 60
090 206 238 140 100 35(38) 110 74 130 140 130 67 129.5 103 135 90 160 102 13 45 11 M10*16(n=8) 45° 10 38.3(41.3) 70
110 255 295 170 115 42 130 144 155 165 74 160 127.5 167.5 110 200 125 14 50 14 M10*18(n=8) 45° 12 45.3 85
130 293 335 200 120 45 180 155 170 215 81 179 146.5 187.5 130 250 140 16 60 15 M12*20(n=8) 45° 14 48.8 100
150 340 400 240 145 50 180 185 200 215 96 210 170 230 150 250 180 18 72.5 18 M12*22(n=8) 45° 14 53.8  120  

Company Profile

About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is  full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.

 Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia 

Logistics

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other ServiceIncluding modeling selection guide, installation guide, and problem resolution guide, etc.

FAQ

1.Q:Can you make as per customer drawing?
   A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
   A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
   A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
   A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
   A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
   A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Right Angle
Gear Shape: Worm Gear
Step: Double-Step
Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

nmrv gearbox

Calculating Torque Requirements for an NMRV Gearbox

Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.

  1. Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
  2. Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
  3. Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
  4. Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.

Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency

Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.

nmrv gearbox

Maintenance and Service of an NMRV Gearbox

Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:

  • Lubrication: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
  • Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
  • Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
  • Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
  • Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
  • Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
  • Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
  • Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.

By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.

nmrv gearbox

Installing an NMRV Gearbox

Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here’s a general guide to the installation process:

  1. Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
  2. Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
  3. Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
  4. Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer’s recommendations for torque specifications.
  5. Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
  6. Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
  7. Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
  8. Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.

It’s crucial to follow the manufacturer’s installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.

China Custom Nmrv Gear Unit Right Angle Worm Gearbox with IEC Motor   synchromesh gearbox	China Custom Nmrv Gear Unit Right Angle Worm Gearbox with IEC Motor   synchromesh gearbox
editor by CX 2023-10-27